| The Comments |
|
|
I believe you cant get washer or anything, very crafty of manufacturer...whole tap or nothing!,
_______________________
www.condadokidsclub.com
12 Months' Keyholding with weekly checks, just €99!!!
Email condadokey@gmail.com
0
Like
Spam post or Abuse? Please let us know
|
|
If it's just dripping, push the lever down so it is seated properly. They gradually work loose and give the impression that it us leaking when it is ok. If it's a Roca type, they are pretty good taps. JF
0
Like
Spam post or Abuse? Please let us know
|
Hi Dan
These are Roca taps and I too had a problem and luckily was able to fix it myself after contacting Roca in the UK.
If you undo the allen key screw under the hot/cold symbol this will allow you to lift the top off and see the inside of the tap. It is a cartridge type system and actually quite a good model. Remove the blue inner plastic seal and give it a good old wash and blow as most times it's simply a bit of sand/dirt lodged in it. You can also unscrew and take out the whole cartridge if needed and again rinse this thoroughly, put back together and hopefully job sorted.
Believe me I'm no plumber so it's not at all a difficult task!
Hope this helps.
Gabe
_______________________
If the people around you don't change then change the people around you....
1
Like
Spam post or Abuse? Please let us know
|
|