Hello, this may have been discussed before but worth reminding with the rainy season approaching.
After the recent downpour we were informed by the keyholders we had water on the floor up to the bathroom, seems door seal not working so got the screw driver out.
On the inside of the door at the bottom the plastic screw fitting is actually a button. If you take off the small plastic surround you can see the seal, press the button (as would happen when the door closes and the button hits the inside of the door frame) the seal pops down, lifting when the door opens. With mine I think the button was screwed in too much so never got pressed to drop the seal. I’ve unscrewed it back about ¼ of an inch and it now closes and now able to grab a sheet of newspaper under the door.
Hopefully this will keep the pesky water at bay.